Cisco CCDP 300-115 Certifications Dumps Exam Learning Materials And Study Guides

300-115 Certification, Cisco , , , , 0 Comments

The Cisco CCDP 300-115 certification builds advanced knowledge of the network design concepts and principles required to develop multi-layer enterprise architectures and network components. Valid Cisco CCDA and CCNA routing and switching or any Cisco CCIE authentication can be a prerequisite.

The Cisco Certified Design Professional (CCDP) validates advanced knowledge of network design concepts and principles. With Cisco CCDP 300-115 certification from Lead4pass, network professionals can discuss, design and create sophisticated multi-tier enterprise architectures for advanced addressing and routing, security, network management, data center and IP multicast, including virtual private networks and wireless domains. The Cisco CCDP 300-115 course includes building a scalable internetwork, building a multi-layer switching network 300-115 SWITCH – Cisco, and designing a network service architecture.
300-115 dumps

How to pass the CCDP certification exam 300-115?

The Cisco CCDP 300-115 certification is a more in-depth study of the basics covered by CCNP certification. CCDP routing and switching is one of the eight capability areas offered by CCDP 300-115 dumps certification. Cisco Certified Professionals advise recruiters that they are using a qualified approach to managing the task at hand.
300-115 dumps
Certification through Cisco CCDP 300-115 is not a day’s work. Here are some tips to make sure you clear CCDP certification without being overstressed:

* Learning materials

Choose a study material that meets at least a 5-star customer rating. Learn the materials you feel comfortable with. The learning materials you like must describe the key points of each module or topic that you will test.

* Organize your time correctly

The worst thing you can do for yourself is to accumulate everything before you take the exam in the short term. It is recommended that you start learning seven to eight months before the test. This will not only help you integrate into the expected materials, but you will not always emphasize it. Make sure you also plan and follow it. When you sign up for an exam, you usually get a list of topics for the exam so you can schedule the time accordingly.

* Go to the topic wise

The Cisco CCDP 300-115 certification is not a certification you can read. You must have an in-depth understanding of each topic and an end-to-end understanding. Reading a complete book at a time without evaluating each subject’s score does not apply to the Cisco CCDP 300-115 certification exam. It is important to practice and evaluate the knowledge and skills of each topic at a practical level. You will be more confident as you move on and better understand the next topic.

* Cisco Labs Gear

If you have not established a home lab for the Cisco CCDA 300-115, you may want to invest in CCDP. You don’t have to spend thousands of dollars to build enough labs at home. Depending on the device recommendations, you can consume as little as a few hundred dollars.

* Practice test

You know the proverb, the practice makes perfects, and this can be applied to this situation. The more you practice, the higher your qualifications for the exam. You will also get used to the problem, mainly because you need to pay attention to any complicated problems. The good news is that there are a lot of practice questions online, many of which are free and you can use them. Lead4pass.com provides you with the best online practice tests to familiarize you with the actual test environment. A good idea is also a timer. Many people are hooked on a problem, they spend all their time on it. You shouldn’t spend more than a minute on each question. If you think something is something you don’t know, or if you doubt it, then pass it on to come back later. The more exercises you have, the better your time management skills will be. You can also know your score immediately, so that if you don’t perform well, you will be conscious.

Implementing the Cisco IP Switching Network (SWITCH 300-115) is a 120-minute qualification exam with 45-55 questions for Cisco CCNP Routing and Switching and CCDP Certification. The SWITCH 300-115 exam demonstrates the conversion knowledge and skills of successful candidates. They are certified to plan, configure, and validate the implementation of complex enterprise switching solutions using the Cisco Enterprise Campus architecture.

Best Cisco CCDP 300-115 Dumps Exam Questions And Answers (Q1-Q10)

QUESTION 1
Whichfour LACP components are used to determine which hot-standby links become active after an interface failure within an EtherChannel bundle? (Choose four.)
A. LACP system priority
B. LACP port priority
C. interface MAC address
D. system ID
E. port number
F. hot-standby link identification number
G. interface bandwidth
Correct Answer: ABDE

QUESTION 2
Refer to the exhibit.
300-115 dumps
Which configuration ensures that the Cisco Discovery Protocol packet update frequency sent from DSW1 to ALS1 is half of the default value? 300-115 dumps
A. DSW1(config)#cdp timer 90
B. DSW1(config-if)#cdp holdtime 60
C. DSW1(config)#cdp timer 30
D. DSW1(config)#cdp holdtime 90
E. DSW1(config-if)#cdp holdtime 30
F. DSW1(config-if)#cdp timer 60
Correct Answer: C

QUESTION 3
It a switch stack is configured to used SDM templates, where are the templates stored?
A. stack master
B. TFTP server
C. flash memory
D. all stack members
Correct Answer: A

QUESTION 4
Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution andcore switches) that provides LAN connectivity from user PCs to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105
DSW2 – primarydevice for VLAN 103 and VLAN 104
A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed.
Troubleshooting hasidentified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to investigate and respond to the following question.
300-115 dumps
300-115 dumps
300-115 dumps
During routine maintenance, it became necessary to shut down the GigabitEthernet1/0/1 interface on DSW1. All other interfaces were up. During this time, DSW1 remained the active device for the VLAN 102 HSRP group. You have determined that there is an issue with the decrement value in the track command for the VLAN102 HSRP group. What needs to be done to make the group function properly?
A. The decrement value on DSW1 should be greaterthan 5 and less than 15. 0
B. The decrement value on DSW1 should be greaterthan 9 and less than 15.
C. The decrement value on DSW1should be greaterthan 11 and less than 19.
D. The decrement value on DSWTs should be greaterthan 190 and less than 200.
E. The decrement value on DSWTs should be greaterthan 195 and less than 205.
Correct Answer: C

QUESTION 5
VLAN maps have been configured on switch R1. Which of the following actions are taken in a VLAN map that does not contain a match clause?
A. Implicit deny feature at end of list.
B. Implicit denyfeature at start of list.
C. Implicit forward feature at end of list
D. Implicit forward feature at start of list.
Correct Answer: A

QUESTION 6
Refer to the exhibit.
300-115 dumps
Users of PC-1 experience slow connection when a webpage is requested from the server. To increase bandwidth, the network engineer configured an
EtherChannel on interfaces Fa1/0 and Fa0/1 of the server farm switch, as shown here:
Server_Switch#sh etherchannel load-balance
EtherChannel Load-Balancing Operational State (src-mac):
Non-IP: Source MAC address
IPv4: Source MAC address
IPv6: Source IP address
Server_Switch#
However,traffic is still slow. Which action can the engineer take to resolve this issue?
A. Disable EtherChannel load balancing.
B. Upgrade the switch IOS to IP services image.
C. Change the load-balance method to dst-mac.
D. Contact Cisco TAC to report a bug onthe switch.
Correct Answer: C

QUESTION 7
Which two statements about SPAN source and destination ports during an active session are true? (Choose two.)
A. The source port can be only an Ethernet physical port.
B. The source port can be monitored in multiple SPAN sessions.
C. Thedestination port can be destination in multiple SPAN sessions.
D. The destination port does not participate in STP.
E. You can mix individual source ports and source VLANs within a single session.
Correct Answer: BD

QUESTION 8
Which two statements about the HSRP priority are true? (Choose two)
A. To assign the HSRP router priority in a standby group, the standby group-number priority priority-value global configuration command must be used.
B. The default priority of a router is zero (0).
C. The no standby priority command assigns a priority of 100 to the router.
D. Assuming that preempting has also been configured, the router with the lowest priority in an HSRP group would become the active router.
E. When two routers in an HSRP standby group are configured with identical priorities, the router with the highest configured IP address will become the active router.
Correct Answer: CE

QUESTION 9
Refer to the exhibit.
300-115 dumps
Which statement about switch S1 is true?
A. Physical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 2 port-channel interface using an open standard protocol.
B. Logical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 2 physical port- channel interface using a Cisco proprietary protocol.
C. Physical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 3 port-channel interface using a Cisco proprietary protocol.
D. Logical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 3 physical port- channel interface using an open standard protocol.
Correct Answer: A

QUESTION 10
Refer to the exhibit. What is the result of setting GLBP weighting at 105 with lower threshold 90 and upper threshold 100 on this router? 300-115 dumps
300-115 dumps
A. Only if both tracked objects are up will this router will be available as an AVF for group 1.
B. Only if the state of both tracked objects goes down will this router release its status as an AVF for group 1.
C. If both tracked objects go down and then one comes up, but the other remains down, this router will be available as an AVF for group 1.
D. This configuration is incorrect and will not have any effect on GLBP operation.
E. If the state of one tracked object goes down then this router will release its status as an AVF for group 1.
Correct Answer: B

Advanced network design engineers, senior analysts, and lead systems engineers can upgrade their design expertise through Cisco Certified Design Professional (CCDP) Cisco CCDP 300-115 certification. Cisco CCDP 300-115 builds advanced knowledge of the network design concepts and principles required to develop multi-tier enterprise architectures and network components.

Cisco CCDP 300-115 SWITCH. This exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.